If Your Water Heater Fails: Immediate Response Guide
If Your Water Heater Fails: Immediate Response Guide
Blog Article
We have noticed this article relating to How to Troubleshoot and Repair an Electric Water Heater directly below on the web and felt it made good sense to talk about it with you on my blog.
Lots of modern-day homes use an electric hot water heater for their heating unit, as a result of its ease and simplicity of use. However, much like any other electric home appliances, troubles might arise with its usage, suddenly. It can be actually frustrating to get up to a cold shower as opposed to a hot one or having your bath with water that isn't hot enough or even also warm. Whatever the case may be, water heater problems can be rather aggravating. Fortunately, we have actually made a list of feasible services to your hot water heater concerns. There are a variety of elements that can create much of these problems, it could be an issue with the power supply, the electric heating element, or the thermostat. Prior to doing anything, guarantee you shut off the major power supply for safety and security. Whatever the issue is, getting it repaired must not position way too much of an issue if you comply with these steps:
Call An Expert:
If after changing all damaged parts as well as resetting your temperature level, the water heater still isn't functioning, you may require to speak to a professional plumber for an expert opinion. The problem with your heating system could be that the hot and cold faucets have been changed or it might be undersized for the amount of warm water needed in your home. Whatever the case may be, a professional plumber would assist solve the issue.
Examine Your Power Supply:
As basic as this might seem, it is very required. Without ample power, your water heater will certainly not function. So the first thing to do when your water all of a sudden stops working is to validate that it isn't a power issue. Examine if the fuse is blown out or the breaker stumbled. If the circuit breaker is the issue, merely turn it on and off once again. Change any busted or damaged fuse. Check the appliance with power after these adjustments to see if it's now working.
Check Your Thermostat:
If your hot water heater still isn't functioning or the water appearing isn't hot enough, you might need to check the temperature level settings on your top thermostat. Ensure the circuit breaker is turned off before doing anything. Open the access panel and press the red switch for temperature reset above the thermostat. This ought to help heat the water. Transform the breaker back on as well as inspect if the issue has been solved.
Check the Heating Element in the Water Heater:
If it's not a power problem, after that attempt taking a look at your burner if it is still functioning. Evaluate each of your heating elements to ensure the issue isn't with any of them. If any one of them is damaged, replace that part and then check whether the hot water is back on.
Conclusion
Hot water heater problems are not constantly major. A number of them are because of minor problems like a blown fuse or worn-out heating element. Replacing the malfunctioning components need to work. Nonetheless, if you are still unable to address the issue, give a call to your local plumber to come to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I'm very involved in Hot Water Heater Repair and I am praying you liked the post. If you please take a moment to share this blog post if you appreciated it. Thank you so much for going through it.
Request plumbing analysis. Report this page